How to install VAS5054 for Mercedes-Benz?

VAS5054 can connect with software compatible with J2534 standard protocol such as Xentry Passthru, Odis Engineer. Therefore, It is used not only for VAG models but also for Mercedes-Benz vehicles. The following article from Eurocartool will guide you on how to install VAS5054 Clone to diagnose Mercedes-Benz vehicles.

What is the function of VAS5054?

VAS0554 is a specialized diagnostic device for vehicles belonging to the VAG group. Technicians often use VAS5054 to diagnose, troubleshoot, install, and program all control systems. Specifically:

  • Automatically recognize vehicle models, and automatically connect all electronic box systems.
  • Read and clear fault codes for all vehicle control systems.
  • Displays the current parameters of the vehicle.
  • Check the activation of the control system.
  • Reset modes to default.
  • Programming, and setting operating values ​​of various electronic control systems.

Supported Protocols:

  • K Line (ISO9141-2)
  • High-speed CAN(ISO 11898-2)
  • Low-speed CAN (ISO11898-3)
  • J1850 (SAE J1850)

Therefore, the device can be connected to diagnostic software such as Xentry Pasthru and Odis Engineer.

Instructions for Install VAS5054a for Mercedes-Benz

Step 1: Turn off the firewall & Network Protection

Step 2: select D-PDU API V21.14.008 VW PT (PassThru) and Run as administrator


Step 3: Press Keep all files


Step 4: Press “Yes”


Step 5: Finding D-PDU_API V1.21.23 WInRAR archive and Press “Exact to D-PDU_API V1.21.23”


Step 6: File D-PDU_API V1.21.23 appear and you Press on it, After that, you run as administrator D-PDU_API V1.21.23 application

Step 7: Keep Pressing “next” to run this software


Step 8: Press Edit VAS5054A#Serial-UPDATE-EDIT-ME

Change all numbers from 111111111 to 083600808

After that, Press VAS5054A #Serial-UPDATE-EDIT-ME again to Registry Editor


Step 9: Start Xentry software and select the device


You can watch the video Install vas5054a for Mercedes-Benz cars below. This video was compiled in detail by Eurocartool’s experienced technicians and is an extremely useful document for you.

From the step-by-step instructions to install VAS5054 clone software with Mercedes-Benz vehicles described in detail in this article, you can do it yourself simply. However, for those who do not have experience in installing software, it is easy to make mistakes that affect the operation process. So contact us for a free consultation via WhatsApp: +13155472355. Our team of seasoned technicians is ready to assist you 24/7.

Leave a Reply

Your email address will not be published. Required fields are marked *