How To Use ODIS Service Software For Repair Lamborghini Huracan Car ?

VAG car includes 8 sub-brands: Audi, Skoda, Seat, MAN, Lamborghini, Bentley, VW, Bugatti is one of the most famous and modern car brands on the market, the more modern the car, the more improved the features. Advances make the electrical engineering of vehicles more complex. Making repair and diagnostics difficult, Odis Service is dedicated diagnostic software that helps you from A to Z with diagnosis, coding, programming, and in-depth installation of the system. Today Eurocartool shares how to use Odis Service software to diagnose Lamborghini Huracan

What is odis service software?

Odis Sevice is produced by VAG to serve their car manufacturers, so it will be indispensable if you are an electrical technician specializing in repairing VAG vehicles. In this article, we dive into how to use Odis Sevice,

You can see detailed information about the software and its functions here: Odis Sevice

What vehicles does odis software support?

Odis Sevice can work well with all car brands vag

ODIS Service software diagnoses techniques, reads and deletes errors

connect-odis-software

connect-odis-software

connect-vag-5054-with-car

connect-vag-5054-with-car

Vesion Man For Odis - S

Vesion Bentley For Odis - S

Vesion Bentley For Odis - S

How to use ODIS SERVICE to diagnose VAG car.

Spare parts

After inspection, preliminary assessment. This white Lamborghini Huracan has very bad light damage and needs to be replaced to ensure safety when used. There are some images of the vehicle which need to be repaired.

See detailed step-by-step instructions below:

Steps to use odis software to diagnose VAG cars

See detailed step-by-step instructions below:

Step 1: Connect diagnosis device VAS5054 with Car, connector is below the footrest.

-11%

VAS5054A

Step 2: Turn on the key source to connect ODIS SOFTWARE

Step 3: The software is connected, and starts to read errors on the video:

1. The software will enter the VIN code and model automatically
2. The software asks are you logged in to code online? We don’t need it right now, we are checking and reading general errors.
3. Select STAR DIAGNOSTIC to start to read the error. The software will check the vehicle’s information again to continue. Choose APPLY to star.
4. The software starts scanning and reading errors: The software will display an error list in 2 forms: CONTROL MODULE LIST AND NETWORKING DIAGRAM. We will choose form 2 ‘networking diagram’ for easy viewing.
5. The item displays as NETWORKING DIAGRAM:

• • The white box with a black border is a readable box without errors
  • White box with white border is disconnected
  • The red box with a black border is the box that is having an error

1. Select the item DTC MEMORY LIST to see the error and the solution:

1. For more detailed errors, select Test Plan:

1. Select Documents for the test plan: to read the information to know when to do basic settings, how many steps basic settings need, and what to pay attention to.

1. After reading the error, we use OBD to delete the errors and check it again

1. Complete and hand over the work. This is a video on how to use the software

Here is a detailed video tutorial: How To Use ODIS Software For Repair Lamborghini Huracan Car?

Above, it is all how to use odis software. Hope this article will help your work, if you have any trouble while using it or want to learn about the useful tool, Don not hesitase to ask us any question in the comment section below or send us a message via WhatsApp: +84 388951999.