BMW ISTA-D This software helps technicians read errors, delete errors, activate the system, test plans, update and program, and Lookup circuit diagrams and part locations.
Diagnostic Software is the current dealer-grade diagnostic software commonly used for all BMW F Series and E series vehicles. It replaces older versions of the DIS diagnostic software. ISTA/D software can be used to diagnose all BMW models, but it can only program BMW F-/I-/G-/Mini/RR models and above. It does not support programming for E-Series models.
1. BMW ISTA Software Information
- Software name: ISTA+/D
- Software type: Diagnostic software, research software
- Version: 4.39
- Language: Multi-language
BMW ISTA update to the new version is 4.39. You can perform more functions. It supports you to diagnose vehicles up to the 2021 model year.
Hardware requirements :
To use the software, the hard drive needs the following requirements:
- 2.2Ghz CPU (2 cores min)
- 4Gb RAM (8Gb Recommended )
- Note: Requires 300Gb Physical
- Windows 10 (32-bit or 64-bit)
Some notes on using ISAT D software
ISTA+ BMW is the current dealer-grade diagnostic software commonly used for all BMW vehicles. It replaces the older version of the DIS diagnostic software. ISTA+ / D software is a new version, installed on computers with Windows 10 operating system and diagnoses many new car models. If you are using older versions, there will be many limitations
- Do not update new error codes on the vehicle.
- Do not update new car models.
- The diagnostic interface is outdated.
- The work process takes a long time.
2. Features Of BMW ISTA Software
BMW has classified the ISTA + BMW application into two parts – Programming and Diagnostics. Here’s how it’s applied:
2.1 For BMW ISTA D diagnosis
- Software repair
- Troubleshooting
- Information guide for repair and maintenance
- Vehicle identification and management
2.2 For programming
BMW ISTA software can be programmed when there is an online account.
- Software update
- Switch and retrofit
- Replace the remote control device
2.3 BMW ISTA+/D new version outstanding diagnostic features
- Full dealer-level diagnostics
- Read & Reset fault codes
- Service reset
- Code/program module
- Diesel particulate filter (DPF) regeneration
- Diagram electrical circuits
- Repair instructions
- Technical documents
- EGR system check and control
- Read/Delete/Reset airbag lamp codes
- Read/Clear Reset ABS light codes
- Apply Firmware and Software updates to your BMW
- Diagnostics on modules individually
- Test Vanos
- Read time diagnostics and live display data
- Create test plans for repairs/upgrades/updates
- EWS DMW synchronization
- Program Vehicle functions (including retrofits) items)
- Coding vehicle functions
- Key personalization features and Memory (lights, comfort features, etc.)
- Remote control programming
- Reset adaptations
- Personal values, personal encryption human
- Activate the ABS pump to the oil flow
- Reset SMG / SSG functions
- Turn off RCD warning, Turn off Tire Control inactivity message
- More features…
3. Recommended ISTA BMW Scanner Device
- ICOM-NEXT: Support for all, which is an upgrade of ICOM A2 and ICOM P versions, which is an in-depth diagnostic and programming software for BMW vehicles
- K-Dcan series: E series support is a USB OBD2 interface device for BMW, allowing it to diagnose car models from 1998 to 2020.
- ENET cable: supports F and G models.
4. Ista D BMW Vehicle Models Support Diagnostics
ISTA+ supports car models:
- BMW 1 Series (E81, E82, E87, E88, F20, F21, F52, F40)
- BMW 2 Series (F22, F45, F46)
- BMW 3 Series (E46, E90, E91, E92, E93, F30, F31, F34, G20)
- BMW 4 Series (F32, F33, F36)
- BMW 5 Series (E60, E61, F10, F11, F07, F18, G30, G31, G38)
- BMW 6 Series (E63, E64, F06, F12, F13, G32)
- BMW 7 Series (E65, F01, F02, F03, F04, G11, G12
- BMW X1 (E84, F48)
- BMW X2 (F39)
- BMW X3 (E83, F25, G01)
- BMW X4 (F26, G02)
- BMW X5 (E53, E70, F15, G05)
- BMW X6 (E71, E72, F16)
- BMW X7 (G07)
- Mini (R50, R52, R53, R55, R56, R57, R57, R58, R59, R60, R61, F54, F55, F56, F60)
If you want to diagnose your BMW professionally you can follow our YouTube channel: Car Diagnostic Software
You can see a beginner’s guide to ISTA D software here:
Special at Eurocartool !!!
With a professional technical team, we bring to you:
- 24/7 technical support service: Diagnosis, Coding-programing via Teamviewer
- 1-year software warranty and lifetime support
- Free repair documents for new car models with full video instruction
- Limited edition manual was written by Eurocartool’s technicians during the process of coding and programming offline Mercedes- Audi -….- BMW
Our Mercedes-Benz technicians will be available to assist you 24/7 anywhere via:
- Emai: sales@eurocartool.com
- WhatsApp: +1-848-294-6626
Reviews
There are no reviews yet.