BMW diagnostic software package includes all the software that technicians need to use in the auto repair process such as ISTA D, ISTA P, Esys, ETK… In which, the software has been updated to the latest version. Find out more about this software package in the section below!
1. BMW Software Package
Full package BMW diagnostic software include.
- BMW diagnostic software ISTA D 4.36 – Integrated Services Engineering Application diagnostic software and BMW service software. ISTA-D is used to diagnose BMW of all makes and models from all systems
- ISTA P 3.69 – Integrated Service Engineering / Programming Software. ISTA P is BMW programming software used to handle all coded, programmed, and activated dependent control modules on BMW Group vehicles.
- ETK 2020 – Accessories Catalog, Electronic Parts for BMW.
- ESYS Software: BMW repair software, It is used for programming and coding for the intensive F/G/I series that toggles hidden features.
- ETK: 03.02.02 (1/2020)
- BMW Ai Coder 4.6 – A program that makes these barriers to entry lower and more accessible to code. Just install BMW AI Coder, and you can start using it in English, but each button has a number, so you can easily code it by following the steps. However, it has the disadvantage of being limited in encodable boxes compared to Esys.
- BMW CODING DATABASE V1.3.4 – Data for encoding and programming.
- BMW COD TOOL 2.5- is the software used to update your t Data. It’s only a substitute request for replacements and bypassing the files and adjusting the files. It can be crafted and/or with the Total Commander.
- CIC LANGUAGE CODING 1.2 to rapidly the language of your idrive BWM cic.
- CIC SPECIAL SERVICE 1.0.42. To connect with cars and I click on the video in Motion Video.
- DCAN 2.
- DR.GIN 7.3
- EASY CONNECT Engineer Software for the E series can run directly.
- BMW diagnostic software: ESYS 3.4
- FSC-TOOL 2.18
- HU TOOL V2.6: BMW code reader software
- INPA software 5.06 – Engineer Software for E series, for diagnostics.
- ITOOL RADAR 1.1 Tool – Used for ICOM identification, activation, or release of ICOM Gateway.
- NSC DUMMY 2019
- BMW diagnostic software: WINKFP TOOL 5.3 – Engineer Software for E series, for programming.

ISTA D Software
ISTA D This is software that helps technicians read errors, delete errors, activate the system, test plans, update and programming, Look up circuit diagrams and part locations.
The functions of the ISTA D software include: Software repair; Troubleshooting; Information guide for repair and maintenance; Vehicle identification and management; Software update; Switch and retrofit; Replace the remote control device.etc.
ISTA P Software
ISTA P is Integrated Services Engineering application/programming software. ISTA P is best BMW coding software, used to handle all dependent control modules coded, programmed, and activated on BMW vehicles

The functions of the software include:
- Replace, install battery code when replacing (Battery type change).
- Perform programming, update, coding, and replacing the ECU box.
- Customize enabling and disabling system options on the vehicle, installing other accessories for the vehicle “Vehicle retrofitting.”
- Auto VIN.
- EWS Synchronization
- Programming of Vehicle functions (including retrofitting items).
- Coding of vehicle functions.
- Key Personalization and Memory features (lights, comfort features, etc.)
- Help programming the remote control.
- Reset the original integrations.
- Encryption, personalization.
Note that the ISTA-P does not support the latest G-system program, because no G-system
ESYS Software
ESYS is used for programming and coding for the intensive F/G/I series that toggles hidden features. Read programming and coding data series F/G/I
- Convert FA to Order XML FILE
- CR2859 – Coding 2.0 in E-Sys CR2945 – MAPPING CVN file in PX CONTAINER to store CAF
- Editor New module KA1223 – Use mode log level from properties files in
- KA1224 software – “Default Restore” for the parameters of the TAL processes
- KA2521 -E-Sys: to conduct TAL, check your name and guide of the TAL journal.
- KA2768 -Open TA Category fsc Backup from E-Sys…
Requirements for laptops compatible with the BMW diagnostic software
BMW diagnostic software for windows requirements:
- Windows 10 (64-bit)
- Core i5
- Ram at least 4GB
- SSD 400GB free space
You can refer to some laptop models below: Laptop Panasonic CF-19, Laptop Panasonic CF-53, Panasonic Toughbook CF-54
You can refer to the software package including laptop, device and software: BMW Diagnostic Package
3. BMW INPA Software Equipment

BMW programming tool now includes protocols like ICOM A2, ICOM P. But with the upgrade aimed at technicians can do newer car models and codes More in-depth customization but also some changes and new features added, see below features:
- Gbit workshop LAN, backward compatible
- Prepare for Gbit LAN on vehicle OBD (cars don’t support this interface yet and the interface is not defined, ICOM Next hardware adaptation will be needed for interface future Gbit cars, which will cause adaptation costs)
- Faster boot time and high throughput
- Adopts high-performance, low-power ARM SoC
- Improved processing power
- More OBD cables for easy connection
- Lighted button when logging in, etc.
BMW ICOM NEXT is best BMW programming tool supports the following models: BMW – Motor BMW – MINI – Rolls Royce
4. Instructions For Connecting Diagnostic Equipment ICOM NEXT
Connecting and using the Star ICOM NEXT diagnostic device is extremely simple. With just a few steps, you can link the Mercedes software with the car and check all the systems on the car quickly.

This is our youtube channel: Car Diagnostic Software
When you purchase this software package, we will assist with the remote installation for you or install them on the SDD and send it to you. Our technicians are always ready to assist you at any time.
Special at Eurocartool !!!
With a professional technical team, we bring to you:
- 24/7 technical support service: Diagnosis, Coding-programing via teamviewer
- The most reasonable price
- 1 year software warranty and lifetime support
- Free repair documents for new car models with full video instruction
- Limited edition manual written by Eurocartool’s technicians during the process of coding and programming offline Mercedes- Audi -….- BMW
Our BMW technicians will be available to assist you 24/7 anywhere via:
- Email : sales@eurocartool.com
- WhatsApp: +84388951999
Reviews
There are no reviews yet.